Table of Contents
Advertisement
11N
Load Balancing
Enter the Average user count per AP, which is the average number of wireless devices that
may associate any BSAP before the BSC balances the client load among the BSAPs. Valid
values for this setting are:
•
BSAP-1500 and BSAP-1540: 1-56
•
Other AP models: 1-64
Enforcement: Select the relative strength of each BSAPs' enforcement of the specified
average AP client count
•
Low: BSAP rejects a client device once before allowing it to associate.
•
Medium: BSAP rejects a client device up to three times before allowing it to
associate.
•
High: BSAP rejects a client device up to five times before allowing it to associate.
•
Always Reject: Hard cap the number of users on an individual AP.
QoS Settings
Optional. Enable system-level QoS on the BSAP for voice and video traffic. (See
"Configuring VoWLAN QoS" on page 9-3 for background information on VoIP.):
To enable WMM settings, mark the Enable WMM and Voice Call Admission
1.
Control? checkbox.
Mark the Enable SVP checkbox to enable Polycom/Avaya Voice Protocol(SVP).
2.
Admission
If WMM is enabled you can specify the following:
Control Settings
Enter the maximum number of voice clients that may associate to the BSAP in the
1.
Voice Sessions field.
2.
Enter the maximum number of video clients that may associate to the BSAP in the
Video Sessions field.
The above maximum voice and video sessions settings affect only SSIDs that have voice
and video QoS enabled. See "Creating SSIDs" on page 12-20 for information about
creating/editing BSAP SSIDs. Note that a BSAP's system-level QoS and the Wi-Fi
multimedia QoS that you enable for voice and video SSIDs are complementary. We
recommend that you enable both QoS methods when passing voice or video traffic on
the BSAP.
BSAP-1700 and
For BSAP-1700s and BSAP-1800s (MIMO), specify the following:
BSAP-1800
BSAP1700: MIMO Compression Mode: (Requires a special client adapter)
1.
MIMO Settings
Data frames are compressed by hardware, which can increase data throughput. A
special MIMO client is required for this feature.
•
BlueSecure™ Controller Setup and Administration Guide
6.5Mbps
13Mbps
19.5Mbps
26Mbps
39Mbps
52Mbps
58.5Mbps
65Mbps
0 = Disabled
Configuring Global Radio Settings
6.5Mbps
13.5Mbps
13Mbps
27Mbps
19.5Mbps
40.5Mbps
26Mbps
54Mbps
39Mbps
81Mbps
52Mbps
108Mbps
58.5Mbps
121.5Mbps
65Mbps
135Mbps
78Mbps
150Mbps
104Mbps
117Mbps
130Mbps
13.5Mbps
27Mbps
40.5Mbps
54Mbps
81Mbps
108Mbps
121.5Mbps
135Mbps
150Mbps
162Mbps
216Mbps
243Mbps
270Mbps
300Mbps
12-15
Advertisement
Table of Contents
