Table of Contents
Advertisement
Chapter 15: Status
Displaying the
Click the Status tab in the BSC administrator console, click the Diagnostics tab, and then
Task Execution
click the System link at the top of the page. The Task execution menu page appears as
Menu
shown in Figure 15-15.
Ping
Use the standard Packet InterNet Groper utility to determine if the BSC can reach a
specified IP address over a specified network interface. Provide an IP address or fully
qualified domain name for the target host and specify the originating Ethernet port on the
BSC. Select Any to let the Controller decide based on routes.
Traceroute
Use the standard TCP/IP utility to determine the route packets are taking from the BSC to
a specified host over a specified interface. Provide an IP address or fully qualified
domain name for the target host and specify the originating Ethernet port on the BSC:
Select Any to let the Controller decide based on routes.
Reset
Reset all client BlueProtect Scanning Intervals. To force a client re-scan, log the client.
BlueProtect
Cached Client
Scans
15-18
Figure 15-15: Task Execution Menu Page
Advertisement
Table of Contents
