Figure 10-11: Dns Proxy Page - ADTRAN BlueSecure Controller Setup And Administration Manual

Managed-side Enable DNS Proxy? - If this checkbox is marked, wireless clients are provided with a DNS
DNS proxy entry containing the IP address of the BSC's managed interface. All DNS requests are
proxied (i.e., received and forwarded) by the managed interface to internal DNS servers
on the protected side.
If cleared, wireless clients are provided with protected-side DNS entries. Default value:
Disabled.
Answer failed DNS queries? - If this checkbox is marked, the BSC answers all DNS
requests for any user who is not logged into the network. If a user enters a valid DNS
name or URL, the BSC serves the user login page and then redirects the user to his
requested destination after he has logged into the network. If a user enters an invalid
DNS name or URL, the BSC serves the user login page and then displays the appropriate
warnings/errors after the user has logged into the network. Enabling this option allows
the BSC to redirect a higher percentage of users trying to access the network.
If this checkbox is cleared, the BSC will not serve the user login page to a user who has
entered an invalid DNS name or URL.
Default value: Disabled.
Local DNS Enable DNS resolution for local domain names? - If this checkbox is marked, the BSC
Name intercepts all DNS requests to resolve host names for the user login page, administrator
Resolution login page, logout function, and secure tunnel services and redirects them to the host
name and interface specified in Hostname and Interface (see setting below).
If cleared, no DNS internal BSC redirection occurs for these names. Default value:
Disabled.
Note: The domain name should be different than that used by your organization, to
ensure that only requests for internal network resources are intercepted by the BSC.
Service Type: Specify the host names you want the BSC to resolve and the interface to
which DNS requests are redirected for user login page, administrator login page, logout
function, and secure tunnel services. You can configure the following redirections:
• login - User login page at the specified host name and interface. Default host name:
login. Default interface: Protected.
• logout - Logout function at the specified host name and interface. Default host name:
logout. Default interface: Protected.
BlueSecure™ Controller Setup and Administration Guide
Domain Name System (DNS) Settings

Figure 10-11: DNS Proxy Page

10-19