ADTRAN TRACER 6000 SERIES User Manual page 85

TRACER 6000 Series Split System Manual
> F U
IRMWARE PGRADE
Specify the unit to upgrade. The following options are available:
L IDU
OCAL
L ODU
OCAL
R IDU
EMOTE
R ODU
EMOTE
> F U
IRMWARE PGRADE
Use this command to start (
the process via the terminal emulation software (consult your documentation for instructions on how to do
this). For TFTP updates, you can cancel the process by selecting
> F U
IRMWARE PGRADE
(Available for TFTP updates only.) Indicates progress or problems encountered during the current upgrade
of the local unit. The field displays
completed. At the end of a successful update, the contents of this field are copied into the Local Previous
Status. For a detailed listing of these messages, please refer to DLP-5, Updating the Firmware Using
TFTP, on page 101.
> F U
IRMWARE PGRADE
(Available for TFTP updates only.) Displays the status of the previous update of the local unit. Following a
successful update, this field reads
appropriate error message displays. Refer to DLP-5, Updating the Firmware Using TFTP, on page 101 for
more details on available error messages.
> F U
IRMWARE PGRADE
(Available for TFTP updates only.) Indicates progress or problems encountered during the current upgrade
of the remote unit. The field displays
completed. At the end of a successful update, the contents of this field are copied into the Local Previous
Status. For a detailed listing of these messages, please refer to DLP-5, Updating the Firmware Using
TFTP, on page 101.
612806320L1-1B
U > U
TILITY PGRADE
Upgrade the local IDU.
Upgrade the local ODU. When upgrading the local ODU, the upgrade
file is first loaded into the IDU and then transferred to the ODU.
Upgrade the remote IDU. When upgrading the remote IDU, the
upgrade file is first loaded into the local IDU and then transferred
through the ODU over the wireless link to the remote IDU. The actual
upgrade process is not started on the remote IDU until the entire
upgrade file has been received.
Upgrade the remote ODU. When upgrading the remote ODU, the
upgrade file is first loaded into the local IDU and then transferred
through the local ODU over the wireless link to the remote IDU. The
remote IDU then proceeds the update process of the ODU. The actual
upgrade process is not started on the remote side until the entire
upgrade file has been received.
U > C
TILITY OMMAND
S ) or stop ( A ) a firmware upgrade. For XMODEM updates, cancel
TART BORT
U > L C
TILITY OCAL URRENT
if no update is in progress or when the update is successfully
I
DLE
U > L P
TILITY OCAL REVIOUS
U
PGRADE FINISHED SUCCESSFULLY
U > R C
TILITY EMOTE
if no update is in progress or when the update is successfully
I
DLE
D
ESTINATION
A from this field.
BORT
S
TATUS
S
TATUS
. If an update was unsuccessful, the
S
URRENT TATUS
Section 5 User Interface Guide
85