ADTRAN TRACER 6000 SERIES User Manual page 108

Section 7 MIBs
1. MIBS SUPPORTED BY THE TRACER 6000 SPLIT SYSTEM
Table 1 lists the MIBs supported by the TRACER 6000 split system.
Table 1. MIBs Supported by the TRACER 6000 split system
rfc2495.mib
rfc2863.mib
rfc3418.mib
rfc3595.mib
rfc3635.mib
adtran.mib
ianaif.mib
ads1.mib
tracer.mib
SNMPv2-SMI, SNMPv2-TC, and SNMPv2-CONF are not compiled, but the paths to these
files are required by your MIB compiler during setup.
2. MIB COMPILATION ORDER
MIBs are compiled in the order shown in Table 2.
108
Standard – DS1 and E1 interface types
IF MIB – updated MIB II
SNMPv2 MIB
PerfHist-TC-MIB needed for RFC2495
EtherLike MIB
ADTRAN product MIB needed to locate the ADTRAN specific
MIBs on the MIB node tree
IF MIB needed for RFC2495
ADTRAN DS1 MIB
TRACER modular MIB
Table 2. MIB Compilation Order
rfc3418.mib
ianaif.mib
rfc2863.mib
rfc3593.mib
rfc3635.mib
rfc2495.mib
adtran.mib
ads1.mib
tracer.mib
Copyright © 2005 ADTRAN, Inc.
TRACER 6000 Series Split System Manual
612806320L1-1B