Installing/Configuring E1 Hardware; Installing/Configuring Ethernet Hardware - ADTRAN TRACER 6000 SERIES User Manual

Section 8 Troubleshooting Guide

Installing/Configuring E1 Hardware

1. If possible, attach any or all of the intended E1 hardware to the TRACER units using the same
workbench setup. This step offers the perfect opportunity to configure your E1 hardware for
proper functioning with the TRACER hardware.
2. To significantly reduce the probability of an unsuccessful field installation, resolve any remaining
E1 equipment-to-TRACER configuration issues before field installation. See E1 Interface Alarms
on page 122 for more information on resolving E1 interface alarm conditions.

Installing/Configuring Ethernet Hardware

1. If possible, attach any or all of the intended Ethernet hardware to the TRACER units using the
same workbench setup. This step offers the perfect opportunity to configure your Ethernet
hardware for proper functioning with the TRACER hardware.
2. To significantly reduce the probability of an unsuccessful field installation, resolve any remaining
Ethernet equipment-to-TRACER configuration issues before field installation.
126
TRACER 6000 Series Split System Manual
Copyright © 2005 ADTRAN, Inc. 612806320L1-1B