Table of Contents
Advertisement
Chapter 3. Operation
S
TATE
S
TATUS
O
NLINE
N
R
O
ESPONSE
E
MPTY
O
FFLINE
O
/
FFLINE
N
R
O
ESPONSE
N
R
OT
EADY
R
EV
3-4
Read Security: 5
Denotes the module as O
cally installed, it must be marked O
resource.
Marking an installed module O
shooting. If you choose O
tion, but will display O
FFLINE
Only if S
TATE
module for any data movement.
Read Security: 5
Displays status information on the VCOM Module.
The module is enabled and is responding to the system controller's status
polls. This is the normal response of the system.
The module is enabled but it is not responding to the system controller's sta-
tus polls. This response indicates a problem in the system. It also shows if
the module is not installed.
The system controller has neither detected any module in the option slot, nor
has a module been manually enabled for this slot.
The module is installed but has been manually changed to O
The module is still responding to the system controller status polls.
The module is installed but has been manually changed to O
The module is not responding to the system controller's status polls. This re-
sponse indicates a problem in the system. It also shows when the module is
not installed.
The module is installed and performing startup initialization. The initializa-
tion of the VCOM Module should take less than two minutes.
Read Security: 5
Displays the assembly revision level of the selected module.
VCOM Module User Manual
or O
. Even though a module is physi-
NLINE
FFLINE
for it to be considered an available
NLINE
may be useful during system trouble-
FFLINE
, the module will not be in an alarm condi-
FFLINE
.
reads O
can the ATLAS use an installed
NLINE
by a user.
FFLINE
by a user.
FFLINE
61200312L1-1
Advertisement
Table of Contents
