Table of Contents
Advertisement
MENU ACCESS
M
ODULES
S
LT
T
YPE
M
ENU
A
LARM
T
EST
61200312L1-1
The ATLAS 550 system controller automatically detects the presence of the
VCOM Module as it is installed into the system. To access the VCOM
menus and submenus, use the keyboard arrow keys to scroll to the
M
ODULE
appropriate row and column;
Refer to the ATLAS 550 User Manual for detailed instructions on
navigating through the terminal menus.
The following paragraphs describe the M
Read Security: 5
Displays the number of available slots in the ATLAS 550 chassis. S
refers to the ATLAS 550 Base Unit.
Write Security: 3; Read Security: 5
Displays the module type currently installed in the slot or the module type
you plan to install in the slot. If a VCO MModule is installed, the T
automatically defaults to VCOM (the VCOM Module). Alternatively, you
can use this field to preconfigure the system before installing a module by
specifying the module type that will be installed into each slot.
If a module is installed, T
the installed module. To change this name, set T
then select another module.
Read Security: 5
Displays additional status and configuration menus and submenus for var-
ious modules. To access the VCOM Module (VCOM), use the arrow keys to
scroll over to the M
column and down to VCOM; then press
ENU
discussion of the submenu items for this option begins with VCOM Menus
on page 3-5.)
Read Security: 5
Indicates any alarm conditions on the VCOM Module. Press
field to open the A
LARM
Read Security: 5
Indicates when the VCOM Module is executing a test. Press
field to open the T
menu.
EST
VCOM Module User Manual
then,
press
on the keyboard.
Enter
ODULES
automatically displays the name of
YPE
menu.
Chapter 3. Operation
menus of the ATLAS 550.
0
LOT
field
YPE
to E
and
YPE
MPTY
. (A
Enter
in this
Enter
in this
Enter
3-3
Advertisement
Table of Contents
