Making Coffee; Switching On - Miele CVA 4085 Operating And Installation Manual

Switching on

Important: the water piping must be rinsed through every
day and the machine cleaned thoroughly before the first
drink of coffee is prepared. Rinsing will take place
automatically if the Automatic rinsing programme option
has been set to "On" and the machine is cold. Hot water
will run out of both spouts into the drip tray once the
machine has heated up.
If the Automatic rinsing programme option has been set to
"Off", select "Maintenance" to rinse the system (see
"Cleaning and care").
To switch the machine on:
^ Touch the "s" sensor.
The following message will appear briefly in the display:
Information
i
Please fill with fresh water.
This message is a reminder to empty out the water container
to ensure that only fresh water from the plumbed in water
supply is used for making coffee.
The following message will appear in the top line of the
display:
Heating-up phase - do not open the door
ß Maintenance
ß Standard n
ß Settings F
If the Automatic rinsing programme option has been set to
"On" (factory default setting), the machine will be rinsed
through after heating up and the main menu will appear.

Making coffee

19