Machine Front; Stainless Steel Fronts - Miele CVA 4085 Operating And Installation Manual

Machine front

Stainless steel fronts

^ Clean the front of the machine with a solution of hot water
and washing-up liquid applied with a damp cloth. Wipe
everything dry with a soft cloth.
Make sure that no water penetrates behind the display.
E-Cloth
A microfibre "E-Cloth" is available from the Miele UK Spare
Parts Department, which is suitable for cleaning surfaces
such as stainless steel, glass, plastic and chrome without the
use of chemicals.
Avoid the following on all types of front:
– cleaning agents containing soda, acids or chlorides,
– abrasive cleaning agents, e.g. powder cleaners and cream
cleaners.
– abrasive sponges, e.g. pot scourers, or sponges which
have been previously used with abrasive cleaning agents.
When descaling the machine, wipe up any spillages or
splashes of descaling agent immediately.
To prevent the risk of scratches and damage to stainless
steel and aluminium surfaces, pay particular attention to
the following cleaning instructions.
The machine front is susceptible to scratches and abrasion.
Stainless steel surfaces can be cleaned using a Miele E-Cloth
or with a proprietary non-abrasive cleaning agent designed
specifically for use on stainless steel. N.B. Do not use
stainless steel cleaning agents on the controls.
To help prevent re-soiling, a conditioning agent for
stainless steel, such as Neoblank (available from
the Miele Spare Parts Department) can also be
used. Follow the manufacturer's instructions on the label.
Cleaning and care
63