Pre-Brewing - Miele CVA 4085 Operating And Installation Manual

Pre-brewing

Settings: Customising your machine
– If the crema is very dark brown on one side, graduating
almost to white on the other, it could mean that too much
coffee is being used.
Select the User profile for which you want to set the amount of
coffee and
^ touch the sensor beside "Settings".
Settings
ß Time of day
ß Timer
ß Amount of coffee
^ Touch the sensor beside "Amount of coffee".
You can set different amounts of coffee beans to be ground
for espresso, coffee and cappuccino, according to taste.
^ Touch the sensor beside type of drink you want to set the
amount of coffee for.
^ Touch the middle sensor on the left or the right to set the
amount of coffee higher or lower.
^ Touch the sensor beside "ok" to save the setting for this
User profile in memory.
You can programme the machine to pre-brew for a standard
length of time, a longer time or you can switch off the
pre-brewing function. The machine is delivered with
Pre-brewing set at Off (= Without).
When the pre-brewing function is switched on, the freshly
ground coffee is first moistened with a little hot water. Then
the remaining water is forced through the moistened coffee at
high pressure.
When the pre-brewing function is switched off, the hot water
is forced through the coffee immediately.
Select the User profile for which you want to set the
pre-brewing function and
^ touch the sensor beside "Settings".
35