Multi-Function Selector With Turn And Press Mechanism - Miele H 4331 Pyrolytic Operating And Installation Manual

Controls
Multi-function selector with
turn and press mechanism
To select a function, turn the
multi-function selector until triangle V
is underneath the required symbol in
the display of the function you wish to
make changes to.
Then press the multi-function selector
to confirm your choice.
If triangle V
– is flashing, alterations can be made
to the settings of the function
selected.
– is lit up, the function will be
displayed, but changes cannot be
made to it.
20
Whilst triangle V is flashing, use the
multi-function selector to make any
changes:
– Turning it clockwise, increases the
value shown or engages the
function,
– Turning it anti-clockwise, reduces
the value or switches the function off.
The triangle V will flash for approx.
5 seconds.
Settings can only be changed while
it is flashing.
If this period has elapsed you will
have to call up the required symbol
again.
Press the multi-function selector to
confirm your choice.
See the chart for an overview of
symbols in the display and their
settings.
The display will change at a different
rate depending on how quickly the
selector is turned:
– in one minute increments
– in 10 minute increments or
– hour by hour.