Using The Residual Heat-Energy-Save Function; At The End Of The Cooking Duration - Miele H 4331 Pyrolytic Operating And Installation Manual

Entering a cooking duration
Whilst a programme is running the
following show in the display
m
U
– the actual temperature
– Duration or Finish time
Using the residual heat-Energy-save
function
Shortly before the end of a
programme the heating elements will
be switched off automatically.
The residual heat is sufficient to finish
cooking.
Using the residual heat in the oven
saves energy.
p m
"EC" will appear in the display to show
that the oven is in energy save mode.
The actual temperature is no longer
visible.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting had
been chosen.
34
The oven heating will switch on again if:
– the required temperature is altered.
– the cooking duration is lengthened
g )
V

At the end of the cooking duration

– the oven heating switches off
– a buzzer will sound fives times in
– the g symbol flashes,
– the cooling fan will continue to run
g )
Both the audible tone and the visual
V
display can be cancelled by:
– pressing the multi-function selector.
– Turn the multi-function selector to "0".
significantly.
automatically.
succession.
If the buzzer is not switched off it will
continue to sound at 5 minute
intervals as a reminder that cooking
time has finished. This reminder will
carry on for up to an hour.
The standard default setting can be
changed if you wish. See "Altering
oven settings v – P 2 and P 3".
for a while.
If the food is not cooked to your
taste, you can increase the cooking
duration.