Windows; Linux Or Vmware; Solaris - Adaptec CDP-00278-01-A User Manual

Windows

On Windows systems, the Agent and other maxView Storage Manager services start automatically when
the system is powered on.
To verify that the Agent is running:
1. Open the Windows Control Panel.
2. Double-click Administrative Tools, then double-click Services.
3. In the list of services, check that the maxView Storage Manager Agent is installed and running. Then
verify that the maxView CIM server and maxView Web server are running. If not, you can choose to
restart the services. Be sure to observe the proper startup order: CIM server, Agent, Web server.

Linux or VMware

On Linux systems and VMware Guest OSs, the Agent and other maxView Storage Manager services start
automatically when the system is started. To manually start (or stop) the Agent on Linux, enter these
commands:
1. Start the CIM server:
Options Description
Start service
service stor_cimserver start
Stop service
service stor_cimserver stop
Check status
service stor_cimserver status
To start operations from the VMware console, use these commands:
Options Description
Start service
Sfcbd-watchdog start
Stop service
Sfcbd-watchdog stop
2. Start the Agent:
Options Description
Start service
service stor_agent start
Stop service
service stor_agent stop
3. Start the Web server:
Options Description
Start service
service stor_tomcat start
Stop service
service stor_tomcat stop

Solaris

To start (or stop) the Agent on Solaris, enter these commands:
1. Start the CIM server:
Options Description
Start service
svcadm enable stor_cimserver
Stop service
svcadm disable stor_cimserver
Check status
svcs -l stor_cimserver
2. Start the Agent:
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00278-01-A Rev. A, Issue:
maxView Storage Manager User's Guide
36