Fine-Tuning Logical Drives; Renaming A Logical Drive - Adaptec CDP-00278-01-A User Manual

For a RAID 10, be sure to select an even number of SSDs and HDDs!
6. Click Next, then customize the RAID Attributes, as needed. See
54 for more information.
7. Click Next, review the logical drive settings, then click Finish.
maxView Storage Manager begins to build the hybrid RAID drive. Use the Event Log and Task Log to
track build progress.

Fine-tuning Logical Drives

You can fine-tune a new or existing logical drive to meet your needs by changing its name or adjusting
the property settings described in this section.

Renaming a Logical Drive

To change the name of a logical drive:
1. In the Enterprise View, select a controller, then select the logical drive you want to rename.
2. On the ribbon, in the Logical Disk group, click Set Properties.
The Set Properties window opens.
3. In the Logical Device Name field, type the new name, then click OK.
maxView Storage Manager updates the logical drive name and displays the new name in the Enterprise
View.
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00278-01-A Rev. A, Issue:
maxView Storage Manager User's Guide
Fine-tuning Logical Drives on page
54