Changing The Door Hinging - Miele KWL 4712 S ed Operating And Installation Manual

Changing the door hinging

The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
We recommend that the changing of
the door hinging is carried out by a
qualified kitchen fitter.
It is essential that the procedure is
carried out by two people.
Removing the door handle:
First the side section of the handle must
be removed:
^ Pull door handle a towards you. Side
section b slides back, creating a
gap d between side section b and
mounting plate c.
^ Place a suitable object (e.g. a spoon
handle) in gap d, and slowly lever
the handle towards the door.
Be careful not to let the "spoon
handle" slip, causing damage to the
appliance.
The side section b can now be
removed.
30
^ Pull side section b out of the guides
on the mounting plate.
^ Loosen the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.