Table of Contents
Advertisement
Changing over the door:
In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.
^ Close the appliance door.
^ If necessary unlock the door.
^ Unscrew screw a out of lower hinge
bracket b.
^ Raise the door, open it outwards and
remove it carefully.
^ Remove cover d. Unscrew the lower
hinge bracket c and refit lower hinge
bracket b on the opposite side. Refit
cover d on the opposite side.
^ Remove cover cap e from
underneath the door and and pull
hinge pin f out from underneath the
other side of the door.
^ Now insert hinge pin f in the
bearing bush on the opposite side of
Changing the door hinging
the door. Please note the shape of
the notch in the bearing bush (insert
x).
^ Turn hinge pin f 90 ° until it is
securely positioned in the bearing
bush.
^ Then refit cover cap e on the
opposite side of the door.
^ Remove cover g from the top of the
appliance and unscrew hinge
bracket h.
^ Insert hinge pin i in the second hole
of hinge bracket h.
^ Refit brackets j and k as well as
cover l turned through 180° on the
opposite side.
^ Screw hinge bracket h into the
opposite side.
^ Turn cover g through 180°, and fit it
on the other side.
^ Remove plug m from the top of the
door and refit on the opposite side.
^ Place the door on upper hinge pin i.
^ Swing the door slowly inwards so that
lower hinge pin f fits into the guide
on hinge bracket b.
31
Hide quick links:
Advertisement
Table of Contents
