Microcom 465 Operator's Manual page 101

XX 88 Send Serial Number To Serial Port: ^A specifies which stored serial number (1-
16) to send.
XX 89 Send Increment/Decrement Value To Serial Port: ^A specifies which stored
increment/decrement value (1-16) to send.
XX 91 Load Value for Printer to See Valid Gap. Section 5.3.
93 Load Control Code Recognition Status:
0 Enable control code recognition.
1 Disable control code recognition.
XX 95 Load User Defined Steps for Label to Advance:
XX 96 Load Advance Delay: ^A specifies how many milliseconds to delay repositioning
of the label in tag/tear and peel-and-dispense modes.
97 Tag/Tear Operation: Section 2.6.1.
0 Turns off tag/tear operation.
1 Advance after every label.
2 Advance after copies count.
3 Advance when idle.
98 Peel-and-Dispense Mode: Section 2.6.2.
0 Turn off peel-and-dispense mode.
1 Turn on peel-and dispense mode.
93