Microcom 466 Operator's Manual page 93

Appendix B
63 Text Mode Control: Section 5.3.8.
0 Disable 1 & 2.
1 Enable auto-print mode
2 Clear all previous text upon receiving new data.
3 Enable 1 & 2.
XX 64 Auto Print String Count: ^A tells the printer how many text strings to accept
before printing. Section 5.3.
70 Clear commands 73-76.
71 Load Maxicode Bar Code Data:
72 Clock Initialization:
XX 73 Load copies count: Tells the printer to print a group of labels. Will not
increment serial numbers (use ^D75).
1 74 Infinity Print: Prints a batch of labels like ^D75 but will continue to print until the
machine is turned off.
XX 75 Load Label Count: Tells the printer to print a batch of labels using the serial
number function if enabled.
XX 76 Load Delay Time Between Labels: Preceded by ^A which contains the wait in
1/10ths of a second. Maximum value is 650.
77 Load PDF-417 Bar Code Data:
80 Clears Commands 86, 88, 89.
81 Disable Serial Number Function: Will disable either single or multiple serial
number commands.
XX 84 Load Text String Number to Increment/Decrement: Tells the printer which
text string number to increment or decrement. For single serial numbers.
Section 5.3.8.
XX 85 Load Increment/Decrement Step Value: This is the value that the single serial
number is incremented or decremented.
86 Single Serial Number Status:
0 Disable increment and decrement.
1 Enable increment. The serial number will be increased by the value from ^D85.
2 Enable Decrement. The serial number will be decreased by the value from
^D85.
XX 87 Load Field Number to Clear Increment/Decrement
status: Clear the status of one or more serial numbers with this command.
466 Operators Manual
Quick Reference Command Summary
87