Fault Finding Chart; Service Recommendations - Flymo Sabre Trim Owner's Manual

FAULT
LINE NOT FEEDING
OR
LINE TOO SHORT
OR
TRIMMER VIBRATES
CONTINUOUS CLATTER-
ING NOISE
LINE SNAPS CONTINU-
OUSLY
WHEEL STOPS TURNING
IF NONE OF THE ABOVE
OR IF FAULT PERSISTS
Husqvarna Outdoor Products are manufactured under an
Environmental Management System (ISO 14001) using, where
practical, components manufactured in the most environmentally
responsible manner, according to company procedures, and with
the potential for recycling at the end of the products' life.
• Packaging is recyclable and plastic components have been labelled
(where practical) for categorised recycling.
• Awareness of the environment must be considered when dispos-
ing of 'end-of-life' product.
• If necessary, contact your local authority for disposal information.
1. We strongly recommend that your product is serviced at least every
twelve months, more often in a professional application.
2. Always use genuine Flymo Spare Parts.
3. Prepacked spares are available from most Husqvarna
Outdoor Products stockists.
4. Your product is uniquely identified by a silver and black prod-
uct rating label.
5. If you have a problem with your machine contact your local Approved
Service Centre ensuring you have full details of your product as
described on the product rating label.
6. Should it be necessary for work to be carried out by your Service

Fault Finding Chart

CHECK
Is the automatic line feed work-
ing?
Is the line fed out and visible?
Has line been removed from
cleat?
Is the manual line feed working?
Has the motor reached full
speed before use?
Has too much line been fed out?
Is the line cutter missing from
the safety guard?
Are you using the trimmer cor-
rectly?
Is the line jamming on the
spool?
Clean wheel and groove on trimmer head. SEE "MAINTENANCE"
Contact Husqvarna Outdoor Products Customer Service
Telephone : 01325 302302
Environmental Information

Service Recommendations

No
No
No
No
Yes
Yes
?
Yes
The symbol on the product or on its packaging indicates that
this product may not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the recy-
cling of electrical and electronic equipment. By ensuring this prod-
uct is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please con-
tact your local council office, your household waste disposal service or the
shop where you purchased the product.
Centre, it is important to take your complete machine including
cable and any extension cables used.
A network of specialist dealers can be found in your local Yellow Pages.
T o obtain service on your Flymo product simply telephone or visit your
local Service Centre. Should you require service under the terms of our
guarantee the Service Centre will require proof of purchase.
All of the centres listed stock genuine Flymo Spare Parts.
NOTE: Our Service Repairers act on their own behalf and are
not empowered to commit or legally bind Husqvarna
Outdoor Products in any manner whatsoever.
ACTION
Manually feed out line.
SEE "MANUAL LINE FEED"
Remove cap and spool, free line
and re-fit spool and cap. SEE
"CUTTING HEAD"
The line may be jammed on the
spool. Rewind line to remove
crossed loops. Check that line is
in correct section of spool.
Allow the motor to reach full speed
before use.
SEE "MANUAL LINE FEED"
Contact your local approved Service
Centre or Husqvarna Outdoor
Products Customer Service.
Only use tip of nylon line to trim.
SEE "How to trim and edge"
Rewind the line on the spool, if
symptoms still persist, change
spool and line.