Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Flymo Power Trim SET250
Summary of Contents for Flymo Power Trim SET250
- Page 1 ® Original Instructions...
-
Page 2: Carton Contents
Manual moulded on plug Guard IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK... - Page 3 3-pin plug. 5. If in doubt consult your local Service Repairer or qual- Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors ified electrician before the machine is used.
-
Page 4: Assembly Instructions
Assembly Instructions Assembly of Switch Handle to Tube (A1) • Ensure that the internal cable is not twisted. 1. Insert the tube into the switch handle. 2. Push until it clicks into position. • ENSURE THAT THE TUBE IS FULLY LOCATED BY ATTEMPTING TO REMOVE IT. - Page 5 How to trim and edge • WARNING • The use of eye protection is recommended. Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line. Do not allow cutting head to rest on the ground. Do not overload your trimmer.
-
Page 6: Cutting Head
7. Refit the cap. To fit nylon line only: • Remember ! Your Flymo Trimmer is designed to use only nylon line with a maximum diameter of 1.5mm. Use only genuine Flymo nylon line. Cleat 1. -
Page 7: Maintenance
Keep fingers and hands clear of the line cutter on leading edge of guard. Caring for your Power Trim After you have finished using your Flymo Power Trim follow the procedure below: AVOID ACCIDENTAL STARTING. REMOVE PLUG FROM MAINS AND KEEP FEET AWAY FROM THE... -
Page 8: Replacement Parts
Fault Finding Chart WARNING Disconnect from the mains electricity supply before attempting any maintenance or adjustment. FAULT CHECK ACTION Is the automatic line feed work- Manually feed out line. LINE NOT FEEDING ing? SEE “MANUAL LINE FEED” Is the line fed out and visible? Remove cap and spool, free line LINE TOO SHORT Has line been removed from... -
Page 9: Ec Declaration Of Conformity
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Copyright © 2008 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks of Flymo S.A.
Need help?
Do you have a question about the Power Trim SET250 and is the answer not in the manual?
Questions and answers