The Icp Controller Is The Secondary Controller; Update The Icp Windows 95 Driver - ICP RS Series User Manual

Upon completion of the Windows 95 installation you will need to load the ICPCON
program to Windows 95. The following steps will take you through this process.
1. Find the ICPCON.EXE file in the DRIVERS\WIN95 directory on the ICP System CD.
2. Copy ICPCON.EXE to your Host Drive. Start the ICPCON program.
3. Press ENTER to select the Controller. Press ENTER to select the Protocol.
4. Press ENTER to select the Controller installed.
5. Highlight View/Change Settings and press ENTER.
6. Highlight Cache Settings and press ENTER.
7. Highlight Delayed Write. Use the space bar to toggle setting to ON.
8. Press ENTER two times. Delayed Write is now enabled.
9. Highlight Save Information and press ENTER.
D.7.2 The ICP Controller is the secondary controller
1. Transfer the WIN95 files from the ICP System CD to a 3.5" floppy disk. The files are lo-
cated in the directory, (your CDROM drive letter):\DRIVERS\WIN95. You will need this
disk later in the Windows 95 Setup.
2. In Windows 95 double click on My Computer icon. Double click Control Panel icon.
3. Double click the System icon. Click the Device Manager tab.
4. Double click Other Devices. Double click PCI SCSI Bus Controller.
5. Click Driver. Click Change Driver. Double click SCSI Controllers.
6. Click Have Disk. Insert the ICP Windows 95 driver disk you created in step 1.
7. Click OK. Click OK again. Click OK again.
8. Click Cancel. Never click Test. Windows 95 is unable to determine if the ICP BIOS
can be removed. Using the Test option may cause the system to freeze.
9. Remove the ICP Windows 95 driver disk. Restart the system.
D.7.3 Update the ICP Windows 95 Driver
Download the WIN95.EXE file from the ICP web site (http://www.icp-vortex.com). This
1.
self-extracting file contains all the Windows 95 files you need.
2. Run WIN95.EXE to get the update files.
3. Format a 3.5" HD disk (1.44MB). Copy all Windows 95 files to this disk.
4. In Windows 95 double click on My Computer icon. Double click Control Panel.
80