ICP RS Series User Manual page 164

Note: If you want change the media of a removable disk during operation, the media MUST
NOT BE INITIALIZED with ICP RAID Console (ICPCON) or the ICP RAID Navigator. Further-
more these devices have to be reserved for the raw service. Thus, the removable disk is
handled like a non direct access device.
Icon Description
Physical Disk
Removable
Disk
The SCSI Parameters
The SCSI parameters configure a Physical Drive (especially its performance). By changing
the SCSI parameters, you can
set the synchronous transfer rate
change the settings of the hard disk cache
enable or disable the disconnect feature
enable or disable the tagged queues
Warning: By changing these parameters on a new hard disk or a hard disk, which has been
connected with a non ICP Controller, this hard disk will be initialized and all data on this
hard disk will be lost.
164
double click opens...
Physical Drive
Information
right click opens...