Loading The Icpcon Program Under Solaris 7/8; Loading The Icpcon Program Under Windows Nt / 2000; Loading The Icpcon Program Under Windows 95/98; Loading Icpcon Under Sco Unix - ICP RS Series User Manual

Loading ICPCON on a workstation. In this case, too, the ICP NetWare driver and the auto-
loading module CTRLTRAN must have been previously loaded on the fileserver console. In
addition, the module CTRLIPX.NLM has to be loaded. This module searches for a file
named CTRLIPX.CFG. This file must be located in the same directory as CTRLIPX.NLM.
The system administrator has to set up a user group named ICP_OPERATOR. All users be-
longing to this group are given access (through ICPCON) to the ICP Controller(s) in this
specific fileserver (Access level 0). Now, the ICPCON program can be loaded from one (or
more) workstation(s):
ICPCON ENTER
J.1.2 Loading the ICPCON Program Under Solaris 7/8
The ICPCON program for Solaris 7/8 is part of the ICP System CDROM. To load the program
under Solaris 7/8, enter:
ICPCON ENTER
J.1.3 Loading the ICPCON Program Under Windows NT / 2000
The ICPCON program for Windows NT / 2000 is part of the ICP System CDROM. To load the
program under Windows NT / 2000, enter:
ICPCON ENTER
For using ICPCON to monitor the server(s) remote, the MON4SOCK.DLL has to be loaded
in addition (must be located in the same directory as ICPCON). It supports SPX/IPX and
TCP/IP network protocols (for NetBIOS you can load instead MON4NETB.DLL).
J.1.4 Loading the ICPCON Program Under Windows 95/98
The ICPCON program for Windows 95/98 is part of the ICP System CDROM. To load the
program under Windows 95/98, enter:
ICPCON ENTER
For using ICPCON to monitor the server(s) remote, the MON4SOCK.DLL has to be loaded
in addition (must be located in the same directory as ICPCON). It supports SPX/IPX and
ICPCON ENTER
J.1.5 Loading ICPCON Under SCO UNIX
In order to be able to use the ICPCON program under SCO UNIX (2.x, 4.x and 5.x), it be-
comes necessary to substitute the standard terminal entry by a new one:
cd /usr/lib/terminfo ENTER
tic gdt386.src ENTER
Before each loading of ICPCON, this terminal has to be activated by:
TERM = gdt386 ENTER
export TERM ENTER
122