Icp Scsi Accessories - ICP RS Series User Manual

On hard disks, CD-ROMs, tape streamers, etc., the SCSI ID is normally set through jumpers
or small DIP switches. The ICP Controllers offer a far more comfortable method: software
switches in the ICP RAID Console or ICP RAID Navigator programs allow you to easily set
the SCSI ID of an ICP SCSI channel. It is recommended to leave the default ID value at 7
(allowed values 0, 1, 2, 3, 4, 5, 6 and 7). Some operating systems require that the SCSI ID of
certain SCSI device (e.g., tape streamer, CD-ROM) is set to a particular value (for more in-
formation, please refer to the appropriate chapter in this manual).
B.4.4 ICP SCSI Accessories
Order # Part Name
8839 Wide/Ultra2
and Ultra160
Flat Ribbon
Cable
8844 Wide/Ultra2
and Ultra160
Round Cable
8877 Wide/Ultra2
and Ultra160
Round Cable
8845 Wide/Ultra2
and Ultra160
SCSI Bracket
8849 Wide/Ultra2
and Ultra160
SCSI Bracket
8850 Wide/Ultra2
and Ultra160
SCSI Bracket
8880 Wide/Ultra2
and Ultra160
Round Cable
8951 LVDS/SE Ter-
minator
8952 LVDS/SE Ter-
minator for
SE/LVDS Hard
Disks with SCA
Connector.
8953 External
LVDS/SE Ter-
minator
8954 SCSI Wonder
46
Description
150 cm Wide/Ultra2 and Ultra160 SCSI
cable with seven 68 pin HD SCSI connec-
tors (male).
3 meters Wide/Ultra2 and Ultra160 Round
Cable with stackable 68 pin VHD SCSI
connector (male) and 68 pin HD SCSI
connector (male). Both with thumb screws.
1 meter Wide/Ultra2 and Ultra160 Round
Cable with stackable 68 pin VHD SCSI
connector (male) and 68 pin HD SCSI
connector (male). Both with thumb screws.
Bracket with two internal 68 pin HD SCSI
connector (female) and two external 68 pin
VHD SCSI connectors (female).
Bracket with one internal 68 pin HD SCSI
connector (female) and one external 68
pin VHD SCSI connector (female).
Bracket with one internal 68 pin HD SCSI
connector (female) and one external 68
pin HD SCSI connector (female).
1 meter Wide/Ultra2 and Ultra160 Round
Cable with 68 pin HD SCSI connectors
(male).
Terminator for LVDS or SE buses with 68
pin HD SCSI connector (female). LEDs
indicate, whether the bus/terminator is
operating in SE or LVDS mode.
Terminator for LVDS or SE buses with SCA
connector for the hard disk and 68 pin HD
SCSI connector (female). Connector for
DC. Jumpers for SCSI-ID, Termination,
Termpower, etc.
Stackable external Terminator for SE or
LVD busses with 68 pin VHD SCSI con-
nector (male). Thumb-Screws.
Wide/Ultra2 SCSI Ex-
pander/Repeater/Isolator
Application
Connection of up to 5 internal
Wide/Ultra SCSI devices per SCSI
channel and one SE/LVD termi-
nator (Order No.: 8951).
For LVDS operation.
Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem.
For LVDS operation.
Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem. For LVDS operation.
Connection of external
Wide/Ultra2 and Ultra160 SCSI
subsystems. For LVDS operation.
Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem. For LVDS operation.
Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem. For LVDS operation.
Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem. For LVDS operation.
Termination of SE or LVDS 68 pin
cables.
For LVDS operation.
This product converts Wide/Ultra2
and Ultra160 or Wide/Ultra hard
disks with SCA connector into
"normal" hard disks with termina-
tion (SE and LVDS), DC connec-
tor, Jumpers for SCSI-ID, etc..
For LVDS operation.
For LVDS operation.
Max. 80MB/sec Data Transfer
Rate. For Clustering Systems.