Icp Service And Icp Mail - ICP RS Series User Manual

K.9 ICP Service and ICP Mail
There are further powerful tools which are part of the ICP RAID Navigator delivery:
ICP Service
ICP CTRLSRV
ICP Mail
It is recommended to install the ICP Service / ICP CTRLSRV and the ICP Mail tool on each
server which is equipped with an ICP Controller. Thus, remote access to ICP Controllers in a
network can be easily managed from one or several authorized users.
To install the ICP Service under Windows NT, copy ICPSRV.EXE and ICPSRV.CPL into the
winnt\system32 directory and load
..\ICPSRV -i
from the command line. This installs the service. In a next step load in the "control panel"
the "services" program and activate the ICP Service with the Start button.
If you want to start the ICP Service during every new boot of the system automatically, click
on the Startup button.
To configure the ICP Service double click on the ICP Service icon:
The Poll-Interval determines the time between two message acquisitions of the ICP
Service.
Under Workstation you can add workstations which receive broadcast messages from
the ICP Controller.
In the device driver section you can add or remove parameters for the gdtx.sys driver
(e.g., reserve parameters for raw devices).
Allows remote access to an ICP Controller in a Windows NT server
Allows remote access to an ICP Controller in a Novell Server
Converts ICP messages into standard mails (for Windows 9x/NT, MAPI
format)
185