Example 2 - Installing A Mirroring Array - Raid 1 - ICP RS Series User Manual

63
The new Host Drive is assigned a Host Drive Name (here PD_A000) which helps for better
identification, especially in configurations with many different Host Drives. The name can
be easily changed.
C.4 Example 2 - Installing a Mirroring Array - RAID 1
Press the <CTRL><G> key combination when the ICP BIOS message comes up (shortly af-
ter switching on the computer) and load ICPCON from the Flash-RAM of the ICP Controller.
In this case no operating system is required.
Select the menu option Configure Host Drives with ENTER.
The list of available Host Drives contains already an entry. There is a RAID 5 Host Drive.
After selecting Create new Host Drive ICPCON displays a list of "free" hard disks. These are
all the drives which do not belong to a Logical or Host Drive and can be used for new Host
Drives.
Select two hard disks with the SPACE bar (these hard disks become marked with an "*")
and press ENTER.