Confi Guring Your Tv's Settings; Viewing Settings Menu; Conditional Access; Language - Toshiba 40BV700F Owner's Manual

Settings Menu Operation, Conditional Access
Confi guring Your TV's Settings
Detailed settings can be configured to suit your
personal preferences.

Viewing Settings Menu

Press MENU button and select Settings icon by
using Left or Right button. Press OK button to view
Settings menu.
Operating Settings Menu Items
• Press Up or Down button to highlight a menu item.
• Press OK button to select an item.
• Press MENU button to exit.

Conditional Access

Controls conditional access modules when
available.

Language

Confi gures language settings.

Parental

Confi gures parental settings.

Timers

Sets timers for selected programmes.

Date/Time

Sets date and time.

Sources

Enables or disables selected source options.

Other Settings

Displays other setting options of the TV set.
TOSHIBA_MB61_[GB]_3910UK_IDTV_(IB_INTERNET).indd 24 TOSHIBA_MB61_[GB]_3910UK_IDTV_(IB_INTERNET).indd 24

Using a Conditional Access Module

The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from
a service provider and allow additional subscription
broadcasts to be viewed. For more information, see
a service provider.
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
• In order to watch certain digital channels, a conditional
access module (CAM) can be necessary. This module
must be inserted in the CI slot of your TV.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on and then
wait for few moments until the card is activated.
• When no module is inserted, "
module detected" message appears on the screen.
• Refer to the module instruction manual for details
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Press MENU button and select the icon by using Left
or Right button. Press OK button to view Settings
menu. Use Up or Down button to highlight Conditional
Access and press OK to view menu items.
English - 24 -
No Common Interface
26.10.2010 11:00:11 26.10.2010 11:00:11