This television is designed to consume less energy to save environment.
You not only help to save the environment but also you can save money by reducing electricity bills thanks
to the energy efﬁ ciency feature of this TV. To reduce energy consumption, you should take the following
You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On,
the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.
Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce
Disconnect power when going away for longer time.
Note that annually, using the TV set in Power Save Mode has more power efﬁ ciency than disconnecting
the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains
plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode
setting to reduce your annual power consumption.
Please helps us to save environment by following these steps.
Please refer all servicing to qualiﬁ ed personnel. Only qualiﬁ ed personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
You can use the supplied cable holder as the following:
Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated above.
Place cables into the cable holder after all necessary connections are made.
Power Save Mode and Cable Holder
Using the Cable Holder
English - 9 -