Table of Contents
Advertisement
Vantage CNM 2.0
6.5.1 Configuring 802.1x – ZyWALL
Select a ZyWALL device and then click Configuration > WLAN > 802.1x. The screen appears as shown next.
The following table describes the fields in this screen
LABEL
Authentication
Select Authentication Required to authenticate all wireless clients before they can
Control
access the wired network.
Select No Authentication Required to allow all wireless clients to access your wired
network without authentication.
Select No Access to deny all wireless clients access to your wired network.
Reauthentication
Specify the time interval between the RADIUS server's authentication checks of wireless
Timer
users connected to the network.
This field is activated only when you select Authentication Required in the
Authentication Type field.
Apply
Click Apply to save your changes back to the ZyXEL device.
Reset
Click Reset to begin configuring this screen afresh.
6.5.2 Configuring 802.1x – Prestige
Select a Prestige device and then click Configuration > WLAN > 802.1x. The screen appears as shown next.
6-6
Figure 6-4 Configuration > WLAN > 802.1x – ZyWALL
Table 6-3 Configuration > WLAN > 802.1x – ZyWALL
DESCRIPTION
Configuration > WLAN
Advertisement
Table of Contents
