Table of Contents
Advertisement
In Figure 12-1, select an existing rule to edit it or click Add to create a new firewall rule.
The following table describes the labels in this screen.
LABEL
Active
Check the Active check box to have the ZyXEL device use this rule. Leave it unchecked if
you do not want the ZyXEL device to use the rule after you apply it
Packet Direction
Use the drop-down list box to select the direction of packet travel to which you want to apply
this firewall rule.
Select whether to Block (silently discard) or Forward (allow the passage of) packets that are
Action for
matched packets
traveling in the selected direction.
Log
This field determines if a log is created for packets that match the rule (Match), don't match
the rule (Not Match), both (Both) or no log is created (None). Go to the Log Settings page
and select the Access Control logs category to have the ZyXEL device record these logs.
Alert
Check the Alert check box to determine that this rule generates an alert when the rule is
matched.
Click Add to add a new address, Edit to edit an existing one or Delete to delete one. Please
Source Address
see the next section for more information on adding and editing source addresses.
Configuration > Firewall
Figure 12-3 Configuration >Firewall > Edit
Table 12-8 Configuration >Firewall > Edit
DESCRIPTION
Vantage CNM 2.0
12-13
Advertisement
Table of Contents
