Table of Contents
Advertisement
10.1 Static Route Overview
Each remote node specifies only the network to which the gateway is directly connected, and the ZyXEL device
has no knowledge of the networks beyond
10.1.1 Static Route Summary
Select a device and then click Configuration > Static Route.
LABEL
Index
This is the number of an individual entry. You may select a rule to edit or delete it.
Name
This is the name that describes or identifies this route. To delete a static route, erase the
name and then click apply.
Active
This field shows whether this static route is active or not.
Destination
This parameter specifies the IP network address of the final destination. Routing is always
based on network number.
Configuration > Static Route
10 Configuration > Static Route
This chapter shows you how to configure static route.
Figure 10-1 Configuration > Static Route
Table 10-1 Configuration > Static Route
DESCRIPTION
Vantage CNM 2.0
10-1
Advertisement
Table of Contents
