Connecting Serial Ata Cables(Optional); Fan Connections - Zotac nForce 610i-ITX User Manual

Connecting Serial ATA Cables(Optional)

The Serial ATA II connector is used to connect the Serial ATA II device to the
motherboard. These connectors support the thin Serial ATA II cables for primary
storage devices. The current Serial ATA II interface allows up to 3Gb/s data transfer
rate.
There are two serial ATA connectors on the motherboard that support AHCI and RAID
configurations.
SATA-/SATA-- Pin Definition
PIN SIGNAL
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND

Fan Connections

There are two fan connections on the
motherboard. The fan speed can be
detected and viewed in the PC Health
Status section of the CMOS Setup.
SATA-1
1
1
SATA-2
SYS FAN Connector
GND
+12V
Sense
CPU FAN Connector
GND
+12V
Sense
Control
Hardware Installation
R E M O E V
7