Connecting Serial Ata Cables - Zotac nForce 610i-ITX User Manual

NForce 610i/630i-ITX series Motherboard
Connecting Serial ATA Cables(SATA-1~SATA-2 Optional)
The Serial ATA II connector is used to connect the Serial ATA II device to the
motherboard. These connectors support the thin Serial ATA II cables for primary
storage devices. The current Serial ATA II interface allows up to 3Gb/s data transfer
rate.
There are two serial ATA connectors on the motherboard that support AHCI and RAID
configurations.
1
1
6
SATA-/SATA-- Pin Definition
PIN SIGNAL
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
Hardware Installation