Pnp/Pci Configuration; Init Display First; Resources Controlled By - Zotac nForce 610i-ITX User Manual

PowerOn Function
q
Use this option to Power On Mode(by button only, keyboard 98, mouse left/right,
hot key, password or any key. )
HPET Support
q
Use this option to enable or disable HPET Support; if enable, HPET Mode
display. We can select.
PnP/PCI Configurations
Select PnP/PCI Configuration from the CMOS Setup Utility menu and press
Enter to display the PnP/PCI Configuration menu.

Init Display First

q
This function on the PnP/PCI Configuration menu allows you to define if the initial
display is in the PCI slot, onboard or PCI Express slot. Options are [PCI Slot],
[Onboard] and [PCIEx].
Reset Configuration Data
q
This function on the PnP/PCI Configuration menu allows you to enable or disable
the resetting of Extended System Configuration Data (ESCD) when you exit
Setup. Set this to [Enabled] if you have installed a new add-on and the system
reconfiguration has caused a serious conflict that prevents the OS from booting.
The default setting is [Disabled].

Resources Controlled By

q
This function on the PnP/PCI Configuration menu allows you to define if the BIOS
can automatically configure all the boot and plug-and-play compatible devices or
if you can manually select IRQ, DMA, and memory base address fields. Select
[Auto(ESCD)] if you want the BIOS to automatically populate these fields. If you
select [Manual] so you can assign the resources, IRQ Resources is enabled
for input.
Configuring the BIOS