Main Menu - Zotac nForce 610i-ITX User Manual

Main Menu

The main menu allows you to select from the list of setup functions and two exit
choices. Use the Page Up and Page Down keys to scroll through the options or press
Enter to display the associated submenu. Use the # $ arrow keys to position the
selector in the option you choose. To go back to the previous menu, press Esc.
q Standard CMOS Features
Use this menu to set up the basic system configuration.
q Advanced BIOS Features
Use this menu to set up the advanced system features and boot sequence.
q Advanced Chipset Features
Use this menu to optimize system performance.
q Integrated Peripherals
Use this menu to set up onboard peripherals such as IDE, RAID, USB and LAN
control.
q Power Management Setup
Use this menu to configure power management, power on, and sleep features.
q PnP/PCI Configurations
Use this menu to modify the system's Plug-and-Play and PCI configurations.
q Pc health status
Use this menu to monitor the real-time system status of your PC.
The following items on the CMOS Setup Utility main menu are commands rather than
submenus:
q Load Optimized Defaults
Load default system settings.
q Set Supervisor and User Password
Use this command to set, change, and disable the password used to access the
system and the BIOS menu.
q Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
q Exit Without Saving
Use this command to abandon all setting changes and exit setup.
Note:
that on the BIOS screens all data
in white is for information only,
data in yellow is changeable, data
in blue is non-changeable, and
data in a red box is highlighted
for selection.
Configuring the BIOS