Security Option - Zotac nForce 610i-ITX User Manual

Security Option

q
The Security Options allows you to require a password every time the system
boots or only when you enter setup. Select Setup to require a password to gain
access to the CMOS Setup screen. Select System to require a password to
access the CMOS Setup screen and when the system boots.
APIC Mode
q
Use this function to enable or disable the Advanced Programmable Interrupt
Controller (APIC). If you disable this option, you also disable the MPS Version
Control for OS option.
MPS Version Control For OS
q
Use this function to select the Multi-Processor Specification (MPS) version that
BIOS passes to the operating system. Use the Page Up and Page Down
keys to scroll through the options.
Full Screen LOGO Show
q
This option allows you to enable or disable the display of the full-screen logo
when the system boots. Use the Page Up and Page Down keys to toggle
between Enable and Disable.
Small LoGo (EPA) Show
q
This option allows you to enable or disable the display of the Small LoGo when
the system boots.
Configuring the BIOS
7