Programming Flash Timing Into Memory - Telematrix Spectrum Plus SP200 Programming Instructions Manual

Programming Flash Timing into Memory

Flash Timing can be programmed into the Spectrum PLUS
This function allows for a timed line break in the sequence of the dialing patterns
when using the speed dial keys. This function may be required for accessing line
features provided by your telephone system or local telephone company. The
flash timing options are 100 through 1000 milliseconds, programmable in 100mS
increments.
To Find the Correct Flash Timing
The factory default Flash Timing is pro-
grammed at 600mS and is the most com-
monly used timing option. However, the
timing can be reprogrammed between
100mS to 1000mS, when needed.
1. Check with your local service provider
or PBX provider to select the appropri-
ate timing.
2. If different timing is required, follow
the Flash Time Programming instruc-
tions on the next page.
Using A Flash When Dialing
To use a Flash when dialing, simply press the "FLASH" key at the appropriate point in
the number sequence being dialed from the key pad.
! NOTE: Each "Flash" counts as 1-digit when stored into a speed dial memory location.
TM
speed dial memory.