Teledyne 9060 Operating Instructions Manual page 10

9060-Zirconia Analyser
1.2 SERIES 1230 OXYGEN PROBES & SENSORS
DESCRIPTION
Teledyne series 1230 oxygen probes and sensors employ state-of-the-art zirconia sensors
and advanced materials, which provide the following benefits:
• Improved control due to fast response time to typically less than four seconds
• Cost-efficient design provides improved reliability
• Longer-life probes with greater resistance to corrosion from sulphur and zinc
contaminants in flue gas
• Low cost allows maintenance by replacement
• Reduced probe breakage due to greater resistance to thermal shock and mechanical
damage during installation and start-up
Series 1230 probe or sensors are simple to install and maintain. All models provide direct
measurement of oxygen level. On-line automatic calibration check is available if required.
Probes or sensors may be used with Teledyne oxygen transmitters and some model
transmitters from other manufacturers. See Set-up 5.5.90 for more details.
All Novatech oxygen probe or sensors are designed and manufactured to exacting
standards of performance and reliability. Series 1230 probe or sensors are the result of
extensive research and development by Novatech, industry and government agencies.
Teledyne Analytical Instruments provides application and after sales support for oxygen
probes, sensors and transmitters, worldwide.
Model 1231 Heated Oxygen Probe