Table of Contents
Advertisement
5.4 ENTER OPTION OR VALUE
A. Options.
To step through the available options for each function press the 'OPTION
' buttons.
When the required option is selected press the 'ENTER' button. An asterisk will then
appear alongside the option selected. When stepping through the set-up functions, the
display will always first indicate the last options entered. The 'Lower Line Select' and 'Data
To Print' set-up items 33 and 82 are multiple options. One or more options may be
selected for these functions.
B. Values
To set a value for a particular function press the 'OPTION
and the 'OPTION
value one digit. Holding the button will change the value more quickly. Once the correct
option or value is displayed it can be entered into the transmitter's memory by pressing the
'ENTER' button. When a value has been entered an asterisk will appear at the R.H.S. of
the lower line.
5.5
SET-UP FUNCTION DETAILS
Note: The * indicates the default setting after a COLD-START. See Section 6.1
1. Number of sensors
Options
Select the number of oxygen probes or sensors being used.
1 Sensor
*
2 Sensors
2. Calendar year
' button to decrease the value. A momentary press will change the
9060 Oxygen Analyser Keyboard
Oxygen 2.04%
EMF 1 mV 49.8
POWER
ALARM
ALARM
DISPLAY
FUNCTION
OPTION
CAL 1
CAL 2
FUNCTION
OPTION
9060-Zirconia Analyser
' button to increase the value
*
SETUP
SETUP
RUN
Z TEST
PURGE
AUTOCAL
ENTER
' or 'OPTION
Advertisement
Table of Contents
