Maintenance; Fuse Replacement - Teledyne 6000A Operating Instructions Manual

Photometric Analyzer
Aside from normal cleaning and checking for leaks at the gas connec-
tions, routine maintenance is limited to replacing Micro-Fuel cells and fuses,
and recalibration.
WARNING: SEE WARNINGS ON THE TITLE PAGE OF THIS
4.1
1. Place small screwdriver in notch, and pry cover off, as shown in
Figure 4-1.
2. To change between American and European fuses, remove the
single retaining screw, flip Fuse Block over 180 degrees, and
replace screw.
3. Replace fuse as shown in Figure 4-2.

Maintenance

MANUAL.

Fuse Replacement

Figure 4-1: Removing Fuse Block from Housing
Maintenance 4
Part I: 4-1