Surround Panning; Surr Prm Screen - Yamaha PM1D Supplementary Manual

Surround panning

Surround panning between multiple output channels is now possible; something that could not be done
using the LR PAN of previous versions.
To move the sound image, you can use the track pad, mouse, CURSOR [√]/[®]/[ ]/[ ] switches, panel
encoders, or MIDI control change messages.

SURR PRM screen

A SURR PRM screen has been added to the PAN/ROUTING function, allowing you to set surround parameters and per-
form surround panning operations.
1
1 SEL (channel select)
Selects the input channel/ST IN channel for which
you will perform surround panning.
In the SURR PRM screen you can set surround
parameters in units of two channels.
2
3
2 Channel number/name
Indicates the number and short name (or unit name)
of the channel.
3 Pairing
Indicates the pairing status of the selected channels.
You can click this button to set/defeat pairing.
Even if input channels are paired, surround param-
eters are not linked except for the on/off setting of
the sends to each mix channel (MIX 17–24).
Surround panning
37