Extended Functionality For The Attenuators - Yamaha PM1D Supplementary Manual

Extended functionality for the attenuators

The functionality of the input channel attenuators has been expanded to allow cut/boost in a range of –96 to
+24 dB.
In previous versions, leaving a large margin in the analog domain for an input channel sometimes caused a
situation in which sufficient input level could not be obtained even with the fader raised all the way. In V1.6,
this problem has been addressed by providing up to +24 dB of boost in the digital domain.
In order to let you rapidly set the attenuator for each input channel, a dedicated ATT screen for setting the
attenuators has been added to the INPUT EQ function.
In conjunction with this change, the [ATTENUATOR] encoder display in the SELECTED INPUT CHANNEL
has been changed as follows.
Range of –96 dB to 0 dB
Same display method as previous.
ATTENUATOR
Extended functionality for the attenuators
Range of +1 dB to +24 dB
The 0 dB LED will remain lit, and the LEDs at the
–96 dB side will light consecutively.
ATTENUATOR
In the MIDI CTRL CHANGE screen (MIDI/GPI/
TC function), the variable range of the [INPUT CH
ATT] parameter that can be assigned to a control
change has also been extended to the range shown
above. Please note that this is not compatible with
the control change values in V1.5 and earlier.
23