Preset Effects Programs (Added In V1.6); Effects Parameters (Added In V1.6) - Yamaha PM1D Supplementary Manual

System software v1.6
Hide thumbs Also See for PM1D:
Table of Contents

Advertisement

Preset Effects Programs
• Basic effect programs
Dynamic Effects
#
Title
30
Multi Band Dyna.

Effects Parameters (added in V1.6)

• MULTI BAND DYNA.
Parameter
LOW GAIN
–96.0 - +12.0 [dB]
MID GAIN
–96.0 - +12.0 [dB]
HIGH GAIN
–96.0 - +12.0 [dB]
PRESENCE
–10 - +10
CMP.THRESHOLD
–24.0 - 0.0 [dB]
CMP.RATIO
1:1 - 20:1
5.0ms - 42.3s (@fs=48kHz),
CMP.RELEASE
6.0ms - 46.0s (@fs=44.1kHz)
CMP.ATACK
0 - 120 [ms]
CMP.KNEE
HARD, SOFT 1 - 5
CMP.BYPASS
OFF, ON
LIM.THRESHOLD
–24.0 - 0.0 [dB]
5.0ms - 42.3s (@fs=48kHz),
LIM.RELEASE
6.0ms - 46.0s (@fs=44.1kHz)
LIM.ATACK
0 - 120 [ms]
LIM.KNEE
HARD, SOFT 1 - 5
LIM.BYPASS
OFF, ON
LOOKUP DELAY
0.0 - 100.0 [ms]
L-M XOVER
21.2 - 8.00k [Hz]
M-H XOVER
21.2 - 8.00k [Hz]
CEILING
–6.0 - 0.0 [dB], OFF
BALANCE
0 - 100 [%]
(added in V1.6)
Type
MULTI BAND DYNA. Multi-band dynamics processor
Range

Preset Effects Programs (added in V1.6)

Description
[Type: STEREO]
Description
Level of the low-frequency range
Level of the mid-frequency range
Level of the high-frequency range
"+" settings lower the high-frequency threshold and raise
the low-frequency threshold. "–" settings do the opposite.
With a setting of 0, the high, mid, and low-frequency
ranges are all affected alike.
Compressor threshold level
Compression ratio
Compressor release time
Compressor attack time
Compressor knee
Compressor bypass
Limiter threshold
Limiter release time
Limiter attack time
Limiter knee
Limiter bypass
Lookup delay
Low/mid crossover frequency
Mid/high crossover frequency
Limiting value to prevent excessive output
WET/DRY balance
49

Advertisement

Table of Contents
loading

Table of Contents