Basic Copying Operation; Copying From A Cd Onto The Hdd - Yamaha CDR-HD1000 Owner's Manual

This section describes the basic copying operation. The operation steps are explained by using the buttons on the front panel and the remote
control.

Copying from a CD onto the HDD

NATURAL SOUND HDD/CD RECORDER CDR–HD1000
POWER
HDD CDR COPY
PHONES LEVEL
MIN MAX
<Preparing a CD>
1.
Press v (OPEN/CLOSE on the remote control) to
open the disc tray.
2.
Load the CD to copy from on the disc tray.
Place a CD correctly aligned in the recessed area of the disc
tray with its label side facing up.
3.
Press v (OPEN/CLOSE on the remote control) to
close the disc tray.
Note
• The disc tray can be also closed by pressing the front edge of
the disc tray gently. If the disc tray is closed in this way, this
unit starts playback of a CD. Press a to stop playback.
This unit starts reading the disc information (type and capacity
of the disc) when the disc is loaded. It takes approximately 10
to 15 seconds to complete the reading.
The following message appears on the display during the
reading.
22
E-

BASIC COPYING OPERATION

2 1, 3
TEXT/TIME
TRACK NO.
BOOKMARK
REC FINALIZE ERASE
L GROUP
dB –30 –10 –6 –2 0
R
MULTI JOG
PUSH ENTER
MODE/SET MENU
COMPLETE CLEAR
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
OPTICAL
COAXIAL
ANALOG
MIN MAX
When reading the disc information has been completed, the
display changes as follows, and this unit becomes ready for
operation.
Total number of tracks
OPEN/CLOSE
1, 3
COPY REC
TRACK NO.
FINALIZE ERASE WRITE
TEXT/TIME INPUT
MODE/SET MENU
COMPLETE
CLEAR ENTER
Total time
L TOC GROUP
dB –30 –10 –6 –2 0
CD
R
L
TOC GROUP
dB –30 –10 –6 –2 0
CD
R