Others; Hdd Utility - Yamaha CDR-HD1000 Owner's Manual

Hide thumbs Also See for CDR-HD1000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

HDD Utility

I To check the HDD utility (HDD Info.)
You can check the HDD utility (capacity, usage, and available
space) of this unit.
1.
Press MENU to display the menu item selection while
this unit is in the stop mode.
2.
Select "HDD Utility" by rotating the MULTI JOG knob
(pressing +/– on the remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to display "HDD Info.".
4.
Press the MULTI JOG knob (ENTER on the remote
control) again to display the capacity of the HDD.
Each time the MULTI JOG knob is rotated (+/– on the remote
control is pressed), the display changes as follows. Indications
are made by time.
Capacity (total time)
Usage (total used time)
Available space (recordable time)
Note
• The times displayed are rough estimates.

OTHERS

L
dB
–30 –10
–6
–2
0
R
L
dB
–30 –10
–6
–2
0
R
L
dB
–30 –10
–6
–2
0
R
L
dB
–30 –10
–6
–2
0
R
L
dB
–30 –10
–6
–2
0
R
I To format the HDD (HDD Format)
You can format the HDD in this unit.
Cautions
• After the HDD has been formatted, all data about the recorded
tracks and settings will be erased from the HDD.
• After all data on the HDD have been initialized, the undo function
cannot be applied to any editing operations before formatting.
1.
Press MENU to display the menu item selection while
this unit is in the stop mode.
2.
Select "HDD Utility" by rotating the MULTI JOG knob
(pressing +/– on the remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to display the HDD utility item selection.
4.
Select "HDD Format" by rotating the MULTI JOG knob
(pressing +/– on the remote control).
5.
"Initialize?" appears on the display when the MULTI
JOG knob (ENTER on the remote control) is pressed.
6.
"Format Really" appears on the display to make a
confirmation when w/d (w on the remote control) is
pressed.
If you wish to format the HDD, press INPUT. If not, press a.
7.
"Format OK" appears in the display when INPUT is
pressed. Then the display returns to the one when the
power of this unit was turned on.
L
dB
–30 –10
–6
–2
0
R
L
dB
–30 –10
–6
–2
0
R
L
dB
–30 –10
–6
–2
0
R
59
E-

Advertisement

Table of Contents
loading

Table of Contents