Display Messages - Yamaha CDR-HD1000 Owner's Manual

Display Messages

Can't Copy
This message is displayed for approximately 3 seconds when digital
recording or copying is not possible according to the SCMS
standard.
See "Rules of Digital Recording" on page 11.
Can't Edit
This message is displayed when a prohibited editing operation has
been attempted.
Change Discs!
This message informs that a CD needs to be changed to a disc to be
used for duplicating when copying from a CD onto the HDD has
been completed.
Check Disc
The disc loaded is not compatible with this unit, or some kind of
error has occurred during operation. Check the disc, and exchange
the disc if necessary.
Data Track
This message is displayed when the data track is being played.
Disc Full
This message is displayed when recording to a CD-R or CD-RW
disc cannot be performed any further because the recording has
been made up to the total recordable time.
Disc No.Full
When the number of discs recorded on the HDD has reached its
maximum of 999 discs, this message is displayed if more discs have
been attempted to be added.
Erasing
Erasing a CD-RW disc is being performed. The erasing progress is
indicated by the level meter.
Finalize OK?
This message confirms starting finalization of a disc. If you wish to
finalize the disc, press w/d (w on the remote control).
Finalizing
Finalization is being performed. The finalization progress is
indicated by the level meter.
HDD Full
This message is displayed when recording to the HDD cannot be
performed any further because the recording has been made up to
the total recordable time.
New Disc
The disc in the disc tray is either a new CD-R or CD-RW disc, or a
CD-RW disc that has been erased by using a Disc Erase or All
Erase.
No data
There are no tracks (data) recorded on the HDD.
No Enough Spc
There is not enough space for copying, or the track number exceeds
the maximum number, or the total recorded time of the disc exceeds
its maximum length when the recording to HDD is performed in the
multi-synchronized or all-synchronized recording mode.
No Previous
When making "Track Adjust" on the TRACK EDITING menu,
there is no track before the track to be adjusted.
No Source
When copying from the HDD onto a CD-R or CD-RW disc, there is
no source recorded on the HDD to be used for copying.
Not Audio
A non-audio disc or a disc for PCs has been loaded in the disc tray,
and recording has been attempted on that disc.
No Undo Data
Undo is not possible.
OPC Adjust
This message is displayed while OPC (Optimum Power
Calibration) optimized the laser power to the reflectivity of the disc.
Approximately 15 seconds may be required to complete this
automatic adjustment. However, this time length may change
according to the type of the disc that has been loaded.
Pack Before !
This message is displayed when the editing operation cannot be
done unless "Pack" is performed.
Reading
This unit reads the format of the disc loaded on the disc tray.
Approximately 10 to 15 seconds may be required to complete the
reading. However, this time length may change according to the
type of the disc that has been loaded.
Standby
This message is displayed for several seconds after REC has been
pressed to record on a CD-R or CD-RW disc.
TEXT Save?
This message is displayed when the disc tray has been attempted to
be opened without performing finalization after copying the data
including the titles (disc title, track title, and album title) to a CD-R
or CD-RW disc.
Track No.Full
One disc can contain up to 99 tracks. Recording is attempted on the
disc that has reached the maximum number.
Unrecordable
In recording or copying onto a CD-R or CD-RW disc, the disc
cannot be used for recording or copying. Or in recording or copying
onto the HDD, no space is available.
Wait
This message flashes while this unit is writing information to the
PMA (Program Memory Area) after a is pressed in recording onto
a CD-R or CD-RW disc, or processing the data on the HDD.
OTHERS
63
E-