Yamaha CDR-HD1000 Owner's Manual page 49

4.
Select the new disc number to by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the new disc number.
Note
• If a wrong selection is confirmed, press CLEAR to cancel it.
Then, select again and confirm the correct entry.
6.
Press COMPLETE.
The selected disc has been moved to and assigned a new
number.
Notes
• If the selected new disc number is already in use, the disc
numbers following this renumbered disc will be automatically up-
numbered by one. However, if there is any unused disc number,
only the discs up to that number will be up-numbered.
• The original number of the disc that has been renumbered will be
available for future use.
Disc Erase
You can erase a selected disc.
1.
Select and confirm "Disc Erase" in step 5 for "DISC
EDITING" on page 46.
The following message appears on the display.
The number of the disc to be erased flashes.
2.
Select the disc to be erased by rotating the MULTI
JOG knob (pressing +/– on the remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc to be erased.
Note
• If a wrong selection is confirmed, press CLEAR to cancel it.
Then, select again and confirm the correct entry.
4.
Press COMPLETE.
The selected disc is erased.
Note
• The number of the erased disc will be available for future use.
L GROUP
dB –30 –10 –6 –2 0
R
Disc to be erased
Disc Combine
You can combine a series of discs into one.
1.
Select and confirm "Disc Combine" in step 5 for
"DISC EDITING" on page 46.
The following message appears on the display.
Disc to be the first in the combination
The disc number to be the first in the combination flashes.
2.
Select the disc to be the first track in the combination
by rotating the MULTI JOG knob (pressing +/– on the
remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc to be the first in the
combination.
The display scrolls to the left to indicate the disc numbers to be
the first and the last in the combination.
Disc to be the first in the
combination
4.
Select the disc to be the last in the combination by
rotating the MULTI JOG knob (pressing +/– on the
remote control).
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc to be the last in the
combination.
6.
Press COMPLETE.
The two selected discs and all those between are combined into
one disc.
Cautions
• One disc can contain up to 99 tracks. When the total track number
on a disc exceeds 99, "Track No.Full" appears on the display.
• The maximum length of one disc on the HDD is 99 minutes 59
seconds. When the total time of the discs to be combined exceeds
99 minutes 59 seconds, "No Enough Spc" appears on the display.
Notes
• When combining a series of discs, the selected disc numbers
following the selected first disc will be available for future use.
• The disc title for the first disc is effective for the combined disc.
DISC EDITING
L GROUP
dB –30 –10 –6 –2 0
R
L
GROUP
dB –30 –10 –6 –2 0
R
Disc to be the last in the
combination
47
E-