Xerox Fiery color server User Manual page 50

4
4-4 Adobe Photoshop
3. Choose the desired working space profile for each color mode in the
Working Spaces area.
Use the following guidelines for specifying working spaces:
• For RGB, choose the profile for the default RGB color space used by the
Color Server. In most cases, this is EFIRGB. Consider sRGB if you usually
view images on a generic PC monitor or rely on a Windows operating system
to manage color on your monitor. If you choose sRGB as a working space, you
must print with the ColorWise RGB Source option set to sRGB.
New RGB documents you create in Photoshop will use this working space.
EFIRGB is set as the default RGB Source color space on the Color Server.
N :
OTE
No matter what RGB space you select, make sure it is available on the Color Server.
For more information on downloading RGB Source profiles to the Color Server,
see the Color
•For CMYK, choose a profile that describes your target press (such as SWOP) if you
are a prepress user. If you are an office user printing final output, choose an output
profile that describes the device connected to the Color Server. To use a device-
specific output profile, you must first upload the profile from the Color Server to
your computer (see the
Photoshop will use the specified working space.
• For guidelines on specifying Gray and Spot working spaces, see your Photoshop 6.x
documentation.
4. In the Color Management Policies area, choose policies for handling documents
without embedded profiles or with embedded profiles that differ from the working
space .
Unless you are an advanced color user, we recommend that you choose Off from the
RGB, CMYK, and Gray menus. This option discards the original profile embedded in
a document if it differs from the specified working space, while preserving the numeric
color values in the document.
For Profile Mismatches, select Ask When Opening. This option displays an alert
message that lest you override the specified policy behavior (Off ) when opening
documents or importing color data.
5. In the Conversion Options area, specify settings for converting between color spaces.
Guide.
Color Guide). New CMYK documents you create in