Table of Contents
Advertisement
TRANSMISSION
Speed Dialling
Speed Dialling can be used to dial any number which has been stored for
Automatic Dialling (see "Storing numbers for Automatic Dialling" in Chapter
3).
Press the SPEED DIAL key and then
''PER*:M
enter the two digits of the Speed Dial
number by pressing the numeric keys.
To enter numbers 1 through 9, first
enter Oand then the number.
2
START/COPY
Check the display.
If the name or
Ej
number shown is correct, press the
4
STARTICOPY key.
(If not, press the
h
o
STOP key.)
Chain D~a/ling
An Automatic Dialling number set for Chain Dialling (see "Storing numbers
for Automatic Dialling" in Chapter 3) can be combined with another Automatic
Dialling number or digits entered manually with the numeric keys to dial one
number up to 40 digits long. The following are some examples of how this
can be done:
Press appropriate Rapid Keys in the proper order. For example, press Rapid Key
01, then Rapid Key 02.
Enter Speed Dial numbers in the proper order. For example, press the SPEED
DIAL key and "22", then the SPEED DIAL key and "23". Press the STARTiCOPY
key after the final number to begin transmission.
Press a Rapid Key and then manually enter a number by pressing appropriate
numeric keys. Press the STARTiCOPY key after the final numeric key to begin
transmission. (Use this method, for example, when you have stored a long
distance access code into a Rapid Key, and want to dial this in combination with
a number which hasn't been stored as an Automatic Dialiing number.)
.
4-6
BASIC OPERATIONS
Advertisement
Table of Contents
